Skip to main content


         This documentation site is for previous versions. Visit our new documentation site for current releases.      
 

Configuring Pulse for case types

Updated on March 29, 2022

Provide case workers, such as customer service representatives (CSRs), with a collaboration tool for open discussion of their work, by configuring Pulse. To accelerate case type development, configure Pulse directly in the case type settings.

When you enable Pulse, case workers can post messages to their colleagues and receive replies. To ensure that case workers only see relevant messages, you can define default feed sources and post display conditions.
Before you begin:
  1. In the navigation pane of App Studio, click Case types, and then click the case type that you want to open.
  2. In the case working area, click the Settings tab.
  3. In the Pulse section, configure the Pulse settings:
    ChoicesActions
    Change the default labelIn the Display label field, enter a new label.

    For example, enter Internal chat, as in the following figure:

    Setting the Pulse gadget label for a case
    Setting the Pulse gadget label at design time, and the run-time Pulse gadget with the new label.

    Enable posting Pulse messagesSelect the Allow users to add posts check box.
    Define a condition for post visibilityIn the row of a post type that you want to configure, in the Visibility list, select when the application displays posts.
    Add a feed source
    1. In the Configure additional feed sources section, click Add Pulse feed.
    2. In the Pulse feed name list, select the source that you want to add.
    3. Optional: To display the feed source default, select the Display feed by default.
    4. Click OK.
  4. Click Save.

Have a question? Get answers now.

Visit the Support Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega.com is not optimized for Internet Explorer. For the optimal experience, please use:

Close Deprecation Notice
Contact us