Skip to main content
LinkedIn
Copied!

Table of Contents

Starting robots from the Work group page

Version:

Only available versions of this content are shown in the dropdown

You can manually start one or more robots from the work group page.

  1. In the application header, click Robots.

  2. On the Work groups tab, click the work group that contains the robots that you want to start.

  3. Start one or multiple robots:

    • To start a single robot, click the More options icon for that robot, and then click Start.

      The RPA Service attempts to start the robot, which is indicated by a progress bar. If successful, the color of the dot on the robot icon changes to green.

    • To start multiple robots, perform the following actions:
      1. Select the check boxes next to all robots that you want to start.
      2. Click the More options icon in the header of the robots list, and then click Start.

      The RPA Service attempts to start the robots, which is indicated by a progress bar. If successful, the color of the dot on the robot icons changes to green.

    Starting a robot can take up to three minutes after you enter the command.

Did you find this content helpful?

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

Ready to crush complexity?

Experience the benefits of Pega Community when you log in.

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us