Skip to main content
LinkedIn
Copied!

Table of Contents

Stopping robots from the list of all robots

Version:

Only available versions of this content are shown in the dropdown

You can manually stop a single robot or multiple robots from the list of all robots.

  1. In the application header, click Robots.

  2. On the Robots tab, locate the robot or robots that you want to stop.

    You can use filters to display robots from a specific work group or in a specific status.
  3. Stop one or multiple robots:

    • To stop a single robot, click the More options icon for that robot, and then click Stop.

      Pega Robot Manager sends a stop command to the robot, and if successful, the color of the dot on the robot icon changes to blue (if the RPA Service is running), or to off (if the RPA Service is not running).

    • To stop multiple robots, perform the following actions:
      1. Select the check boxes next to all robots that you want to stop.
      2. Click the Bulk actions icon, and then click Stop.

        Pega Robot Manager sends a stop command to the robots, and if successful, the color of the dot on the robot icons changes to blue (if the RPA Service is running), or to off (if the RPA Service is not running).

Did you find this content helpful?

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

Ready to crush complexity?

Experience the benefits of Pega Community when you log in.

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us