Skip to main content


         This documentation site is for previous versions. Visit our new documentation site for current releases.      
 

Stopping robots from the work group page

Updated on January 31, 2022

You can manually stop one or more robots from the work group page.

  1. In the application header, click Robots.
  2. On the Work groups tab, click the work group that contains the robots that you want to stop.
  3. Stop one or multiple robots:
    • To stop a single robot, click the More options icon for that robot, and then click Stop.

      Pega Robot Manager sends a stop command to the robot, and if successful, the color of the dot on the robot icon changes to blue (if the RPA Service is running), or to off (if the RPA Service is not running).

    • To stop multiple robots, perform the following actions:
      1. Select the check boxes next to all robots that you want to stop.
      2. Click the More options icon in the header of the robots list, and then click Stop.

        Pega Robot Manager sends a stop command to the robots, and if successful, the color of the dot on the robot icons changes to blue (if the RPA Service is running), or to off (if the RPA Service is not running).

Have a question? Get answers now.

Visit the Support Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega.com is not optimized for Internet Explorer. For the optimal experience, please use:

Close Deprecation Notice
Contact us