Skip to main content


         This documentation site is for previous versions. Visit our new documentation site for current releases.      
 

Upgrading the Pega Robotic Automation Importer component

Updated on January 31, 2022
Before you begin:

To upgrade to a newer version of the Pega Robotic Automation Importer component, perform the following tasks:

  1. Upload the Importer component to a Pega application in your Pega environment.
  2. Verify the automation repository configuration.
  3. Configure the Pega Robot Manager host server and authentication profile.
    For more information, see Configuring the Pega Robot Manager host server and authentication profile.

    In version 8.2, the Pega Robot Manager host domain address was assumed to end with /prweb, so this part of the URL could be omitted in the corresponding dynamic system setting. In later versions, /prweb is not assumed to be a part of the URL and is not added automatically by the system. You might need to add /prweb to your dynamic system setting, because it must contain the full address.

  4. Test configurations for the Pega Robotic Automation Importer component.
  • Previous topic About Pega Robotic Automation Importer component
  • Next topic Installing the Pega Robotic Automation Importer component

Have a question? Get answers now.

Visit the Support Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega.com is not optimized for Internet Explorer. For the optimal experience, please use:

Close Deprecation Notice
Contact us