Skip to main content


         This documentation site is for previous versions. Visit our new documentation site for current releases.      
 

Robot registration and work group assignment for RPA (unattended) robots

Updated on October 7, 2021

Every unattended robot must successfully register with Pega Robot Manager before it can run automations.

The registration process is performed by an administrative operator (also called a registration operator) that has an appropriate access role. During registration, the robot is assigned into a base work group based on the configuration request of the robot or by the configuration of decision tables. A successful registration assigns the robot to the correct base work group with the appropriate access groups and roles.

If you have multiple work groups and you want to move robots between them either manually or by using a schedule, you need to define a list of eligible work groups that are mapped to an administrative operator that is used to register the robots.

With Pega Robot Manager, you can update the decision tables described below through the user interface. For more information, see Changing settings from the Pega Robot Manager interface.

  • Previous topic Initiating a deployment of Pega Robot Manager applications
  • Next topic RPA Service-assisted robots and stand-alone robots

Have a question? Get answers now.

Visit the Support Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega.com is not optimized for Internet Explorer. For the optimal experience, please use:

Close Deprecation Notice
Contact us