Skip to main content


         This documentation site is for previous versions. Visit our new documentation site for current releases.      
 

Starting robots from the Work group page

Updated on October 7, 2021

You can manually start one or more robots from the work group page.

  1. In the navigation pane of Pega Robot Manager, click Unattended RPAWork groups.
  2. Select the work group that contains the robots that you want to start.
  3. Start one or multiple robots:
    • To start a single robot, click the More options icon for that robot, and then click Start.

      The RPA Service attempts to start the robot, which is indicated by a progress bar. If successful, the color of the dot on the robot icon changes to green.

    • To start multiple robots, perform the following actions:
      1. Select the check boxes next to all robots that you want to start.
      2. Click the More options icon in the header of the robots list, and then click Start.

      The RPA Service attempts to start the robots, which is indicated by a progress bar. If successful, the color of the dot on the robot icons changes to green.

    Note: Starting a robot can take up to three minutes after you enter the command.

Have a question? Get answers now.

Visit the Support Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega.com is not optimized for Internet Explorer. For the optimal experience, please use:

Close Deprecation Notice
Contact us