You can manually stop a single robot or multiple robots from the list of all robots.

1. In the navigation pane of Pega Robot Manager, click Unattended RPARobots.
2. Locate the robot or robots that you want to stop.
   You can use filters to display robots from a specific work group or in a specific status.
3. Stop one or multiple robots:
   • To stop a single robot, click the More options icon for that robot, and then click Stop.

     Pega Robot Manager sends a stop command to the robot, and if successful, the color of the dot on the robot icon changes to blue (if the RPA Service is running), or to off (if the RPA Service is not running).

   • To stop multiple robots, perform the following actions:
     1. Select the check boxes next to all robots that you want to stop.
     2. Click the Bulk actions icon, and then click Stop.

        Pega Robot Manager sends a stop command to the robots, and if successful, the color of the dot on the robot icons changes to blue (if the RPA Service is running), or to off (if the RPA Service is not running).

• Stopping robots
• Starting robots from the Work group page