Skip to main content


         This documentation site is for previous versions. Visit our new documentation site for current releases.      
 

Configuring Pega Robot Runtime in RPA implementations

Updated on July 29, 2021

After you perform the steps in Enabling the RPA Scheduling service to simulate a Secure Attention Sequence, the next task is to configure Robot Runtime to work in an unattended RPA implementation. The steps differ depending on which version of Robot Runtime you have installed.

If you are using Pega Robotic AutomationSee the following article

Version 19.1 or later

Configuring Robot Runtime 19.1 and later to work with Robot Manager 6 in RPA implementations

Version 8.0 SP1 2019 or later

Configuring Robot Runtime 8,0 SP1 2019 and later to work with Robot Manager 6 in RPA implementations

version 8.0 SP1 2018 or earlier

Configuring Robot Runtime 8.0.SP1 2018 and earlier in RPA implementations

Note: For best results, install version 19.1 or later.
  • Previous topic Enabling the Pega RPA Service to simulate a Secure Attention Sequence
  • Next topic Configuring Robot Runtime 19.1 and later to work with Robot Manager 6 in RPA implementations

Have a question? Get answers now.

Visit the Support Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega.com is not optimized for Internet Explorer. For the optimal experience, please use:

Close Deprecation Notice
Contact us