Skip to main content


         This documentation site is for previous versions. Visit our new documentation site for current releases.      
 

Updating the received part condition

Updated on March 21, 2021

After the dealer submits the return authorization case, the case manager at the manufacturer opens it to check if all the criteria is correct. The manufacturer can choose the condition from good, bad, or wrong part received. Depending on what the manufacturer chooses, subcases will be created and are routed to the parts inspector (from the manufacturer). The parts inspector inspects, tests, and then selects a disposition based on the findings.

  1. Log into Pega Warranty as a system administrator using the WarSysAdmin operator ID.

  2. In the Return Authorization case, click Begin to begin the Process Received Material (Receive RA) task.

  3. Enter the Part serial number and the BIN name.

  4. From the Condition drop down menu, choose the condition of the received part as Good, Bad, or Wrong Part Received.

  5. Click Submit.

Have a question? Get answers now.

Visit the Support Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega.com is not optimized for Internet Explorer. For the optimal experience, please use:

Close Deprecation Notice
Contact us