INC-131942 · Issue 574322
Orphaned CSS reference removed from DisplayReport harness
Resolved in Pega Version 8.2.8
An intermittent invalid CSS error was appearing in the DisplayReport harness when an operation resulted in the regeneration of the harness content. This was traced to a reference to the workform_pyReportingSkin CSS, which was used in old reporting features and is not in use anymore. The reference has been removed to resolve this issue.
INC-135719 · Issue 580689
Corrected reference exception for filter on a grid sourced from a parameterized report definition
Resolved in Pega Version 8.2.8
An Invalid Reference Exception was thrown after attempting to apply a filter on a grid sourced from a parameterized report definition. This was traced to work done to allow cross-scripting filters to allow filters to contain special characters, and has been resolved.
INC-140110 · Issue 600399
Large filter values accepted in Report Definition edit
Resolved in Pega Version 8.2.8
Report definition edit filter values were not accepting large comma separated values properly. This has been resolved by modifying the logic in RRFilters_Logic to use ReportFilter.getReportFilters.
INC-143191 · Issue 596470
Scheduled tasks landing page shows all tasks
Resolved in Pega Version 8.2.8
Due to pzGetScheduledTasks listview having a hardcoded limitation of 500 records to be fetched, not all scheduled tasks were being shown in the scheduled tasks landing page. This has been resolved by modifying the pyCreateSummary activity to use a newly created Report Definition to fetch data instead of list view.
INC-144756 · Issue 602724
Security improved for searches
Resolved in Pega Version 8.2.8
Authentication requirements have been added to activities associated with searching.
INC-120343 · Issue 573075
Explicit parent added for descendants in subreport to correct summary
Resolved in Pega Version 8.2.8
When using a Report Definition with a Summarize column and a subreport with join class, it was not considering implementation class work objects. As a result, the prepared values were only partially computed. This was traced to the SubReport in SetQuery not having reference to a parent for the descendants classes, and has been resolved by explicitly setting the parent value.
SR-D90400 · Issue 563185
Explicit parent added for descendants in subreport to correct summary
Resolved in Pega Version 8.2.8
When using a Report Definition with a Summarize column and a subreport with join class, it was not considering implementation class work objects. As a result, the prepared values were only partially computed. This was traced to the SubReport in SetQuery not having reference to a parent for the descendants classes, and has been resolved by explicitly setting the parent value.
SR-D80589 · Issue 544840
Check added before clearing Report definition custom filter section page
Resolved in Pega Version 8.3.3
When using a Custom Section in the Report Viewer, the Page referred to at the Prefix was getting reset while running the report. Investigation showed the page was being reinitialized in pzCreateCustomFilterPage step 2, and this has been resolved by adding a 'when' rule for clearing the custom filter page.
SR-D91038 · Issue 553163
Corrected report with combo chart in Case Manager portal
Resolved in Pega Version 8.3.3
After adding the required columns a report in the report viewer and then adding a combo chart and dropping the summarized column on the y-axes and group by column on X-axis, clicking on "done editing" generated the error "pyUI.pyChart: You must have at least two Aggregate Columns in the chart series .pyUI.pyChart.pyDataAxis(1).pyChartOutputType: A Combo chart requires at least 1 Chart Type be a Column". Investigation showed that the second DataAxis page was getting deleted in the pzCleanChartDataAxis activity, causing the validation to fail. This has been resolved by adding a 'when' rule to "pzChartIsSingleY" that checks for "SingleYAxisClustered" chart and refers the same in pzCleanChartDataAxis to skip the data axis deletion.
SR-D53176 · Issue 541792
Error when adding function filter will persist
Resolved in Pega Version 8.3.3
When an exception occurred while adding a filter in the report viewer, the error was shown but cleared due to an immediate refresh of the parent section. Analysis found that step2 of pzGetFiltersFromContent was failing, after which the error was shown, the section reload happened, and the error disappeared. To resolve the error being cleared prematurely, the pzOnLoadReloadReport control has been modified so that when there are messages on the top level page (pyReportContentPage), a parameter will be set on HarnessContextMgr to not to clear them during the next refresh call.