Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

BulkTransfer result screen not showing error msg for resolved WO



While performing a Bulk transfer, when the selected work object is resolved by another user in between the Bulk Transfer process, error message does not display on the Result section.

Error Messages

Not Applicable

Steps to Reproduce

  1. Launch the Bulk Transfer screen and select the Process option.
  2. Search for the work objects from the worklist or workbasket.
  3. Select the work objects that must be transferred.
  4. Open the selected work object in the Perform mode.
  5. Resolve the work object from another session.
  6. Click OK in the Bulk Transfer model dialog. Section reload occurs and status for the selected work object does not display (such as, Transferred, Failed, or Skipped).

Root Cause

A defect in Pegasystems’ code or rules.
Failed status was not set when the Assignment was not available.


Apply HFix-47996.
Suggest Edit

Published November 29, 2018 - Updated December 2, 2021

Did you find this content helpful? Yes No

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us