Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

Defer Load & Pre-loading activity missing in Tab Group Harness

SA-45973

Summary



After performing upgrade from Pega 7.2.1 to Pega 7.3, while configuring Harness in Tab Group, Defer Load and pre loading activity option does not exist.

Error Messages



Not Applicable


Steps to Reproduce

  1. Create section.
  2. Add Tab Group and a dynamic container as one of the tabs to the tab group.
  3. Configure harness as one of the tabs.
  4. Defer Load and Preloading activity option is missing in Harness configuration.


Root Cause



Defer Load and Preloading activity option is not supported from Pega 7.2.2 onwards as the harness is automatically defer loaded.


Resolution

If the Pre-loading activity which is already configured has to be removed, follow the below approach:

1. Private Edit the section rule: pzShowContainerDeferLoad
2. Change the condition for step D to =

Earlier it was !=




Defer Load & pre-loading activity can be seen after performing the above steps. Using the below screen, the activity can be removed.

After removing the activity, discard the pzShowContainerDeferLoad rule change.



Published March 19, 2018 - Updated October 8, 2020

Was this useful?

0% found this useful

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us