Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

no scroll bars for gridcolumns of screen when resized



An external application is used to launch a harness via IAC. The harness is embedded with a grid whose data source is report definition.

When the window is resized, user is unable to navigate through all the columns of the grid as the vertical & horizontal scrollbars do not appear.

Error Messages

Not Applicable. 

Steps to Reproduce

1. Configure IAC and launch a harness through IAC
2. Embed a work area or dynamic containerin the section and refer the section in the harness configured above.
3. In harness configured in work area, refer a section pxlocalaction and give the required parameters like action name (flow action)
4. In the flow action refer a section which contains the grids

Root Cause

The browser is set to compatible mode and the Document mode is forced to use Standard.


This is an expected behavior with the combination of Internet Explorer setting used.

Published August 21, 2015 - Updated October 8, 2020

Was this useful?

0% found this useful

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us