Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

Tab Section gets cut off on navigating tabs



When a user navigates to a tab that has a smaller section (height) than the current tab, and then navigates back to the original tab the bottom portion of the section is cut off.

Error Messages

Not Applicable.

Steps to Reproduce

  1. Create a section with a Layout Group (Tab) that contains 1 long section (Tab A) and one short section (Tab B).
  2. Add section to the create screen of a case
  3. Create case and the window should open on Tab A
  4. Click Tab B
  5. Click Tab A

Actual Behavior: The bottom portion of the section on Tab A will be cut off.
Expected Behavior: The section on Tab A should not be cut off.

Root Cause

Height of harness was not getting calculated on tab switch.


Apply HFix-35968.
Suggest Edit

Published July 27, 2017 - Updated October 8, 2020

Did you find this content helpful? Yes No

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us