Navigation rule — Completing the Node Details Action tab

On the Action tab, specify the action to be performed when the node is selected at run-time; for example, when a user clicks a menu item. This tab displays when Item, Item List or Selected Item are selected in the Type list on the Node Details dialog.

Click the plus sign to specify an action associated with the node. This opens the Behavior dialog, which contains a column for the Event, Action, and a diamond-shaped condition icon (). Conditions do not apply to actions; they apply to the entire node.

To define the node's behavior, click the add row icon . Your choices populate the grid row. After you have completed the dialog, click OK to apply your edits and close the dialog.

If you define more than one click event for a node, the actions are executed from the top down as displayed in the list; the inherited actions (the ones in the rule) execute first. All processing effects of an action in the list will complete before the next action starts. For example, assume a Display > Set Value action is followed by a Launch > Local Action. When the user clicks the button, the Set Value action also triggers a Post Value action (set in a the Behavior field on a Cell Properties panel) and recalculation of an expression. After all processing is completed, the system starts Local Action.

Action Category	Mobile Action Name
Process Work	Show Flow Location
Get Work	Create Work Open Assignment Open Work by Handle
Launch	Harness
Advanced	Run Activity Run Data Transform Run Script

If the navigation rule is Type Mobile, a subset of the actions is available. Actions that appear for a Mobile application are summarized in this table and indicated in the sections below.

Mobile applications support one action per node. Only the first action is executed. Any additional defined actions are ignored.

Certain actions (such as Create Work, Open Assignment, Launch Harness, and Run Script) that display user interface features do not run on a phone device when specified on a node with children. These actions require that the main navigation and content panels appear simultaneously which is not possible on a phone. Therefore, as a best practice, implement these actions on child nodes. If placed on a parent node, they should be optional actions, not critical to work item processing.

Run Activity and Run Data Transform can be run on a node that has children.

Process Work

Add New Work

Field	Description
Action	Add New Work. Adds a new work item using the primary page data. Saves the new work item on the deferred list. See Controls form — Completing the Controls tab for a full description of this action.

Perform Action

Field	Description
Action	Perform Action. Submits the flow action and completes the assignment if either is true: The specified flow action and the current flow action have the same interface (reference the same named section). The flow action does not use HTML to render the interface (an autogenerated action where `No HTML` is selected on form's HTML tab). Otherwise, clicking the control renders the flow action form only. Flow Action — Select the Name key part of a flow action.
Flow Action	Select the Name key part of a flow action.

Show Flow Location

Field	Description
Action	Show Flow Location. Appears only when the navigation rule is Type `Mobile.` Implements the Where-Am-I? feature, so users can view the work object location in a flow.

View Attachments

Field	Description
Action	View Attachments. Presents a list of work item attachments, so users can view or add attachments. The button is visible only for users who hold the Work-.AccessAuditTrail privilege. See Controls form — Completing the Controls tab for a full description of this action.

View History

Field	Description
Action	View History. Displays the work item history, for users who hold the Work-.AccessAuditTrail privilege.

Get Work

Create Work

Field	Description
Action	Create Work. Appears when the navigation rule is Type `Mobile` or `Standard`. Creates a new covered or non-covered work item. Called with a primary page that inherits from the Work- base class. Commits the new work item if there is no flow execution to start; if it starts a flow execution, the commit operation typically occurs when that flow execution creates an assignment.
Class Name	Select the class that contains the flow you wish to start.
Flow Name	Select the flow to start when this node is selected.

Get Next Work

Field	Description
Action	Get Next Work. Returns the next assignment for the operator to work on. This assignment can either come from the operator's worklist or from one of the workbaskets they have access to.

Open Assignment

Field	Description
Action	Open Assignment. Appears when the navigation rule is Type `Mobile` or `Standard`. Returns the next assignment for the operator to work on. This assignment can either come from the operator's worklist or from one of the workbaskets they have access to.
Key	Enter the key of the assignment you wish to open.

Open Work by Handle

Field	Description
Action	Open Work by Handle. Appears when the navigation rule is Type `Mobile` or `Standard`. Opens work based upon the internal key that uniquely identifies the instance.
Handle	Specify the handle of a work item, beginning with the class name.

Open Work Item

Field	Description
Action	Open Work Item. Opens work based upon the work item ID. Specify the full ID of the work item.
ID	Specify the full ID of the work item.

Handle List Items

Use these actions only when acting upon repeating layouts.

Add Child

Field	Description
Action	Add Child. Adds a child item beneath the selected row or branch or in a repeating grid or tree.

Add Item

Field	Description
Action	Add Item. Adds (above or below) a row to a layout.
Position	Select Above or Below.

Delete Item

Field	Description
Action	Delete Item. Deletes a row in a layout.

Edit Item

Field	Description
Action	Enables edit of the selected item in the layout. Not available if the repeating layout Edit Mode is `Read Only`.

Open Local Action

Field	Description
Action	Open Local Action. Displays the flow action you specify.
Flow Action	Flow Action — Select the flow action that will be invoked.
After Action	Select `Refresh Current Item (recommended`) to refresh only the current row after the flow action has ended. In most cases, leave this selection (default). Select `Refresh All Items` to refresh the entire layout.

Open Selected Item

Field	Description
Action	Open Selected Item. Opens the item selected in the layout.

Refresh List

Field	Description
Action	Refreshes the content of the repeating grid or tree based on data in the clipboard. Maintains the current page, filter, or sort.

Set Focus

Field

Description

Action

Set Focus. Sets the cursor focus to the Current Item, Next Item, or Previous Item in the repeating layout.

If you want to set focus from within a row in a repeating grid to another grid or to an editable control outside of the current grid, select Set Focus in the Display category and provide the full path to the property, beginning with the parent page, and represent it on the Pages & Classes tab of the layout containing the repeating grid.

Display

Refresh Section

Field	Description
Action	Refresh Section. Commits the contents of the section that contains the button or another section that you specify.
Target	Select the section to be refreshed as a result of clicking the item. Select either `This Section` to refresh the current section or select `Other Section` to refresh a specified section.
Using Page	Available when `Other Section` is selected for the Target field. Optional. Specify the page and class of the section to be refreshed.
Section	Available when `Other Section` is selected for the Target field. Select the section to be refreshed.
Data Transform	Optional. Enter a Name key part of a data transform. See About Data Transforms. Parameters listed on the Data Transform form's Parameters tab appear beneath this field. Optionally, enter the values you want pass to the data transform.
Activity	Optional. Select an activity to run before refreshing the section. If the activity uses parameters, enter their values. This activity is processed after a data transform. Parameters listed on the Activity rule form's Parameters tab appear beneath the field. Optionally, enter the values you want pass to the activity.

Set Value

Field	Description
Action	Set Value. Sets a target property to the source value. You can configure multiple properties and values. The source property can be editable or read-only.
Property	Enter a property reference (target). For `Value List`, `Value Group`, `Page List`, and `Page Group` properties, enter a literal, property reference or symbolic index value (subscripts): .myList(15) .myGroup("Massachusetts") If you want to set a value from within a row in a repeating grid to an editable control outside of the grid, provide the full path to the property, beginning with the parent page, and represent it on the Pages & Classes tab of the layout containing the repeating grid.
Value	Enter a property reference or a literal constant (source). Click the add row icon to define more properties and values.

Set Focus

Field

Description

Action Set Focus. Sets the cursor focus to an editable control that is bound to a property or to a specific row in a grid, tree, or tree grid.

Target

SmartPrompt Enter a property reference.

.propertyName

If you specify a Page List or Page Group property, additional fields display, enabling you to set Focus On the First Row, Last Row, or to a specific index position within a grid, tree, or tree grid.

To set focus to an index position, select Other in the Focus On field and then use a constant or property reference:

.PageList.propertyName
.PageList(15)

If you want to set focus from within a row in a repeating grid to an editable control outside of the grid, provide the full path to the property, beginning with the parent page, and represent it on the Pages & Classes tab of the layout containing the repeating grid.

Launch

Flow in Modal Dialog

Field	Description
Action	Flow in Modal Dialog. Allows a user to start a flow in a user form and run the process in a modal dialog. The user cannot continue work in the main user form until the modal dialog closes. See Controls form — Completing the Controls tab for a full description of this action.
Using Page	Optional. By default, the flow runs on the primary page pyWorkPage. If you want to run the flow in the context of an included section that is using either an embedded page (such as .pyWorkParty(Originator) or another top-level page, enter a `Page` or `Page List` name defined on the section's Page & Classes tab. Parameters listed on the Flow rule form's Parameters tab appear beneath this field. Optionally, specify values to pass to the flow.
Flow Name	Enter the second key part of a flow rule.

Harness

Field	Description
Action	Harness. Appears when the navigation rule is Type `Mobile` or `Standard`. Replaces an open harness or displays a new one.
Target	Specify the target location where the specified harness displays as a result of clicking the item. Select: `Pop-Up Window` — Displays the harness in a new browser window. In a Mobile portal, this option is supported only for items in the Toolbar Navigation rule. The harness displays inside the pop-up window associated with the Toolbar Navigation rule. For example, overlays (such as Attachments) on tablet devices appear in a pop-up window of a size specified in the width and height fields on this form. `Replace Current` — Replaces the current tab or dynamic container contents with the specified harness, with the option to save (submit) the current data before the new harness is displayed. In a Mobile portal, the harness appears in the main content area. `New Document` — Opens the specified harness with the option to display in a named tab. In a Mobile portal, the Tab Name field is not supported, and therefore, the harness appears in the main content area.
Tab Name	Available for `Replace Current` and `New Document` targets. Specify the tab to be replaced. If this value matches the name of an open tab, the new harness replaces the tab. Otherwise, the new harness appears in a new tab. This feature is not supported in a Mobile portal.
Class	Available for a `New Document` target. Specify the class of the harness.
Harness	Select the harness to display.
Read Only	Select `Yes` if you want the harness contents to appear in read-only mode. (For a `Pop-Up Window` target, if set to `No` you must enter a window name.) This feature is not supported in a Mobile portal.
Use Non-Mobile Harness	Appears only when the navigation rule is Type `Mobile.` This allows you to use a non-mobile harness in a Mobile application. For example, if an instance in your application requires UI controls that are not yet supported by the Mobile portal, this feature enables you to include a Non-mobile harness with the UI controls you require. If you have a harness circumstanced for a mobile application, and a non-circumstanced harness by the same name, the mobile version of the harness is used.
Submit Current	Available for a target of `Replace Current`. Select `Yes` to specify that the current contents is saved before the harness replaces it. This feature is not supported in a Mobile portal. Any displayed or edited data in the open Harness is lost when the new Harness loads.
Window Name	Available if `Pop-Up Window` is selected for the Target. Enter a name that the system uses to identify a browser window. If a window of that name is open, the new harness replaces the contents of that window. Otherwise, the system opens a new browser window and displays the harness in that window.
Window Width	Available if `Pop-Up Window` is selected for the Target. Enter a positive integer to set the window width in pixels. If you leave this and the Window Height field blank, the system replicates the dimensions of the current window. In a Mobile portal, you can use this field to specify the width of overlays (such as Attachments) on tablet devices.
Window Height	Available if `Pop-Up Window` is selected for the Target. Enter a positive integer to set the window height in pixels. If you leave this and the Window Width field blank, the system replicates the dimensions of the current window. In a Mobile portal, you can use this field to specify the height of overlays (such as Attachments) on tablet devices.
Key	Optional. Available for a `New Document` target. Specify the key value (pxInsName) of a data instance you want automatically opened as the new primary page when the harness is displayed. The system uses this value and the Class value to identify the data record. This action executes before a pre-activity (if one is defined).
Data Transform	Optional. Enter a Name key part of a data transform. See About Data Transforms. Parameters listed on the Data Transform form's Parameters tab appear beneath the field. Optionally enter the values you want pass to the data transform.
Activity	Optional. Specify an activity to run before displaying the harness. If the activity uses parameters, enter their values. This activity is processed after a data transform. Parameters listed on the Activity rule form's Parameters tab appear beneath the field. Optionally, enter the values you want pass to the activity.

Landing Page

The Landing Page choice is only applicable in portals defined with the Developer role (for example the Developer or BusinessAnalyst portal rules). The Open Landing Page choice does not apply when the navigation rule is used in portals defined with the User role. See About Portal rules.

Field	Description
Action	Choose `Display` to open a landing page for display, or `CreateNewWork` to create a new work item based on a landing page.
Name	Enter a unique name for the landing page. Attempting to open a landing page while a landing page with the same Name value is open will result in the new landing page overriding the tab in which the already open landing page was displayed.
Class	For Action set to `Display`: Select the class on which the harness for the landing page is based. For Action set to `CreateNewWork`: Select the class on which the flow run to create the work item is based.
Harness Name	Applicable when Action is set to `Display`: Select the harness that the landing page is built on.
Data Transform	Applicable when Action is set to `Display`: Select the data transform used to generate initial values for the landing page.
Page	Applicable when Action is set to `Display`: Specify an existing page.
Read Only	Applicable when Action is set to `Display`: Select to display a read-only harness.
Flow Name	Applicable when Action is set to `CreateNewWork`: Specify the name of the flow used to create new work.
Level A	Enter a value to work with a when condition defined to open the selected item in a specified tab on the landing page.
Level B	Enter a value to work with a when condition defined to open the selected item in a specified tab on the landing page.
Level C	Enter a value to work with a when condition defined to open the selected item in a specified tab on the landing page.
Parameters
Name	Specify additional parameters to pass to the harness or flow.
Value	Specify additional parameter values to pass to the harness or flow.

List View

Field	Description
Action	Open List. Opens a list view.
Class	Select the class of a list view to be opened.
Purpose	Required. Select the Purpose (second key-part) of the list view to be opened from the menu.
Action	Choose `Refresh`, `Redisplay`, or `Sort`.
Header	Select to display the list view header.
Parameters
Name	Specify additional parameters to pass to the list view.
Value	Specify additional parameter values to pass to the list view.

Local Action

Field	Description
Action	Local Action. For harnesses only. Allows the user to complete a local action or local & connector flow actions in a modal window or in an action section (.pyActionArea).
Using Page	Enter a page from the Pages & Classes tab to use when invoking the local action.
Local Action	Select the flow action to be triggered.
Open in Modal Dialog	Optionally, select `Open in Modal Dialog` to present the local action window as a modal window, which appears in front of all other windows and must be completed (or closed) before the user can perform any other process. Select this when the local action accepts one or more input fields Launch local action as the name suggests is for local/local & connector flow actions and it can load the local action in modal or in the action area. Perform action is similar but it is more for flow actions and it advances the flow when the flow action has no ui. The is more related to work items where as the local action can be on any data instances as well.

Open URL in Window

Field	Description
Action	Open URL In Window
Use Alternate Domain	Select to specify an alternate domain for the URL to open. When selected, select a URL in the Alternate Domain URL field. Use the Querystring section to specify the name and value of a query string for the alternate domain URL.
Use Primary Page	Select to call an activity based on the contents of the primary page when this node is selected.
Data Transform	Optional. Enter a Name key part of a data transform. See About Data Transforms. Parameters listed on the Data Transform form's Parameters tab appear beneath this field. Optionally, enter the values you want pass to the data transform.
Activity	Select an activity to return an HTML stream that will be shown in the opened window. Parameters listed on the Activity rule form's Parameters tab appear beneath the field. Optionally, enter the values you want pass to the activity.
Window Properties
Window Name	Specify a text string to define the name of the opened window.
Replace History	Select to erase the history of the opened browser window.
Height	Enter a numerical value to represent the height in pixels of the opened window.
Width	Enter a numerical value to represent the width in pixels of the opened window.
Top	Enter a numerical value to represent the offset in pixels from the top of the screen.
Left	Enter a numerical value to represent the offset in pixels from the left of the screen.
Resizable	Select to enable the opened window to be resized.
Scrollbars	Select to enable scrollbars in the opened window.
Location Bar	Select to enable the location bar in the opened window.
Menu Bar	Select to enable the browser's menu bar in the opened window.
Status Bar	Select to enable the browser's status bar in the opened window.
Tool Bar	Select to enable the browser's tool bar in the opened window.

Report Definition

Field	Description
Action	Report Definition. Executes the retrieval and sorting operations, but not the formatting and display processing, of a report definition.
Class	Select the class for the Report Definition.
Name	Select the name of the Report Definition.

Wizard

Field	Description
Action	Wizard. Launch a wizard based on the key part label and class.
Class	Select the class of the wizard. This class name will begin with `PegaAccel-.`
Wizard Label	Specify a label for the wizard.
Parameters
Name	Specify additional parameters to pass to the wizard.
Value	Specify additional parameter values to pass to the wizard.

Advanced

Open Rule

Field	Description
Action	Open Rule. Opens a rule that takes the pzInsKey value as its parameter.
Handle	Select a pzInsKey key value in the rule you want to open.
Resolved By	Select `Name`, `Handle`, or `Handle By Condition` to specify how the rule is located.
Handle Condition	Applicable for `Handle By Condition`: Select a when condition to define when a rule should be resolved by handle.

Open Rule By Name

Field	Description
Action	Open Rule By Name.
Rule Type	Select the class in which the rule is saved.
Instance Name	Required. Select the name of the rule you wish to open.

Open Rule By Keys

Field	Description
Action	Open Rule By Keys. Opens a rule by its class and the class key values.
Rule Type Class	Specify the class that has keys defined.
Key	Read only, based on the keys defined on the class rule form for the class selected in the Class field.
Value	Enter the key value that pertains to the rule you wish to open.

Run Activity

Field	Description
Action	Run Activity. Appears when the navigation rule is Type `Mobile` or `Standard`. Runs the activity you specify in the Activity field.
Activity	Required. Enter the Activity Name key part of the activity. Parameters listed on the Activity rule form's Parameters tab appear beneath this field. Optionally, enter values you want pass to the activity.
Parameters

Run Data Transform

Field	Description
Action	Run Data Transform. Appears when the navigation rule is Type `Mobile` or `Standard`. Runs the data transform you specify.
Page	Select `Auto` to keep the primary page context. Select `Other` to use another page context.
Name	Appears if you select `Other` on the Page field. Enter the page name.
Data Transform	Enter the Name key part. Parameters listed on the Data Transform form's Parameters tab appear beneath the field. Enter the values you want pass to the data transform.
Parameters

Run Script

Field	Description
Action	Run Script. Appears when the navigation rule is Type `Mobile` or `Standard`. Calls a custom JavaScript function or PRPC API. See Controls form — Completing the Controls tab for a full description of this action.
Function	Enter the clipboard property or literal reference that contains the function you wish to run. For a Mobile application, enter the name of a JavaScript function in quotes.
Parameters
Name	Specify additional parameters to pass to the script function.
Value	Specify additional parameter values to pass to the script function.

About Navigation rules

Navigation rule — Completing the Node Details Action tab

Process Work

Field

Description

Field

Description

Field

Description

Field

Description

Field

Description

Get Work

Field

Description

Field

Description

Field

Description

Field

Description

Field

Description

Handle List Items

Field

Description

Field

Description

Field

Description

Field

Description

Field

Description

Field

Description

Field

Description

Field

Description

Display

Field

Description

Field

Description

Field

Description

Launch

Field

Description

Field

Description

Field

Description

Parameters

Field

Description

Parameters

Field

Description

Field

Description

Window Properties

Field

Description

Field

Description

Parameters

Advanced

Field

Description

Field

Description

Field

Description

Field

Description

Field

Description

Field