Section form - Completing the Design tab

Select a layout and then drag and drop controls to populate the cells of the layout. A cell can hold a label or property value or a form field that accepts a user-entered property value. The property value uses a control to present the value in read-only or read-write mode.

Use the controls at the top of this tab and drag and drop operations to review or update the section and other associated sections.

You can:

• Create a new layout
• Modify an existing layout
• Build a prototype

Click the Show wireframes icon to display wireframes that show the Structure of a section, names of rules referenced, and the relationships of elements in the section.

When you save this rule form, Pega Platform also saves any open sections it references, and validates the rules as they are saved.

Sections created in App Studio using templates can be converted to the full section editor.

> Create a new layout (section, layout, or repeating layout)

1. From the Layout control group, select one of the controls:

   Control	Description
   Layout	Note: A layout is a <TABLE> element containing cells arranged in one or more rows and one or more columns. You can then change the number and size of rows and columns, and set up the contents of each cell. See Adding a layout.
   Dynamic Container	See Adding a Dynamic Container.
   Section	See Adding a section.
   You cannot add a Container or a Panel Set control to a section.

2. Populate the cells of the layout with basic or advanced controls. From the Basic or Advanced control group, select a control and drag it to the cell. For information on working with the toolbar, see Layout tab toolbar.

   Basic controls

   Control	Description
   Text Label	Note: Add a static read-only text label into a cell. See Adding a label.
   Formatted Text	Add a formatted-text control. See Adding formatted text.
   Text Input	Add a Text Input, which corresponds to .pxTextInput control. See Adding a Text Input control.
   Text Area	Add a TextArea, which can contain more than one line of text. Corresponds to the .pxTextArea control. See Adding a Text Area control.
   Icon / Image	Add an icon or image to the form, in a cell or on a header. When clicked at runtime, the icon starts an action. Corresponds to the .pxIcon control. See Icon control.
   Button	Place a button into a cell or at the bottom of the form. When clicked at runtime, the button starts an action. Corresponds to the .pxButton control. See Button control.
   Check Box	Add a check box representing a TrueFalse value. Corresponds to a .pxCheckbox control. See Adding a check box.
   Radio Buttons	Add a radio button group representing a property value. Corresponds to the .pxRadioButtons control. See Adding a radio button control.
   Link	Place a text link in a cell. When clicked at runtime, the link starts an action. Corresponds to a .pxLink control. See Link controls.
   Date & Time	Add a text box containing a Date or DateTime value. Corresponds to the .pxDateTime control. See DateTime control.
   Dropdown	Add a Dropdown control to present a list of values. Corresponds to the .pxDropdown control. See Adding a Dropdown control.

   Advanced control group

   Control	Description
   Paragraph	Reference, in a cell, a paragraph rule that can present read-only text and images using rich-text HTML markup. Optionally, you can link a SmartInfo pop-up section with the paragraph. See Adding a paragraph.
   Address Map	Used to specify an address or location in Google Maps from within an application. Corresponds to the pxAddressMap control. See Adding an Address Map control.
   AutoComplete	Use an AutoComplete text box to present a drop-down list of dynamic choices computed by an activity. See Adding an Autocomplete field.
   Smart Label	Add a red label that opens a pop-up SmartInfo section when the user hovers the mouse pointer over the label. See Adding a Smart Label.
   Chart	A cell can contain a chart. See Adding a chart.
   Data Field	For sections that are part of a composite application built with the Pega Web Mashup . Add a hidden field to expose a property value, making it available to the external page that displays the composite application. See Adding a Data Field control.
   Data Visualization	Add a Data Visualization control. See Adding and configuring a Data Visualization control.
   Information Mashup	Used to connect to an external application and delegate access to OAuth 2.0-resources. Corresponds to the pxInformationMashup section. See Adding an Information Mashup section.
   Menu	Add a menu to a composite portal. See Adding a Menu Bar.
   Multi-Select list	Use a Multi-Select list to present a list of dynamic choices when an application user can select more than one item from the list. See Multi-Select list control.
   Rich Text Editor	Add a rich text editor control. Corresponds to the .pxRichTextEditor control. See Adding a Rich Text Editor control.
   Signature Capture	Used to capture a user signature, either by using a mouse or through touch input on a mobile device. Corresponds to the pxSignatureCapture control. See Adding a Signature Capture control.
   Timeline	Add a timeline control. See Adding and configuring a timeline control.
   Video	Add a video control. See Adding a video.

   In addition to these Advanced controls, you can add interactive data displays to support quick review or editing for a Page List or Value List. Adding a Tree, Adding a Grid, Adding a Tree Grid.

3. Complete the cell properties panel. A cell can hold a label or property value or a form field that accepts a user-entered property value. The property value uses a control to present the value in read-only or read-write mode.

   You can reference properties on the primary page — typically the page holding the work item — with simply a period followed by the name. You can reference properties on other pages with the pagename.propertyname syntax. Don't forget to identify the class of pages (other than the primary page) on the Pages & Classes tab.

   Tip: You can complete two cells of a layout in one step if the left cell is to contain a text label and the right cell is to contain a field corresponding to a property on the Application Explorer:
   1. Locate and expand the work type that contains the property on the Application Explorer.
   2. Expand the Data Model category and the Property rule type to list property names.
   3. Select a Single Value property to be placed in the field. Drag and drop it into the desired cell.
   4. The system places the Short Description text of the property as a label in the left cell. It places the property as a (read-write) field in the right cell. You can adjust the settings for these cells.
4. Use the tools in the Layout tab toolbar to add, delete, or modify the layout.

If the section contains deprecated controls for which there are auto-generated alternatives available, an Update Controls option displays.

Click Update Controls to automatically update the deprecated controls. Buttons with custom settings must be manually converted to use the pxButton control. To add controls to those automatically updated, see Upgrading deprecated and outdated controls on the Pega Community.

Areas of the layout that correspond to sections (or other elements) that you cannot update appear with a gray background. This may mean that the rule needs to be checked out to you, or belongs to a locked ruleset version, or a ruleset version you are not allowed to update.

> Identifying controls on this tab

> Controls that alter the preview

The preview area of this tab holds an approximate visual presentation of the runtime appearance of the section. These buttons do not affect the contents of the rule, only the display on this tab:

• Click the Show wireframes icon to present the SmartFrames wireframe preview. Blue wireframe rectangles help you understand the structure of the section, names of rules referenced in this rule, and the size and other relationships of elements in the section.

• Click the Hide wireframes icon to hide wireframes, providing a less busy and higher fidelity preview.

Layout tab toolbar

These controls operate on layout structures. Select one or more cells first, then click the control to apply the operation described. When a control is not available (grayed), it cannot be applied to the current selection. Hover over a control to display a tool tip with information about the control.

You can also use keyboard shortcuts and right-click context menus to cut, copy, paste, and delete.

Select a layout, section include, column, row, or cell and then right-click and select: Cut, Copy, Paste, Delete, Insert Row, Insert Column, Delete Row, Delete Cell or Delete Column. When copying an entire layout, select Paste Above or Paste Below.

> Expand and collapse controls

Sections in a harness may be presented as horizontal elements. These work in the Design tab: click a plus sign to expand a section.

When you save a section form, the state of these controls is saved as well, and determines the initial presentation of the form. To achieve the desired results, set the expand and collapse elements as desired to control the initial presentation of a subsection before you save the section form.

Structure of a section

Structurally, a section consists of one (or more) layouts or <TABLE> grids, or one or more repeating layouts. (This structure is not required for sections that are produced with handcrafted HTML code). Layouts and repeating layouts contain rows and columns, defining a set of cells. A cell can be empty or contain any of various fields and controls.

Fields on a section may be located on any page identified on the Pages & Classes tab of the section.

Prototyping a section before the properties are defined

You can rapidly mock up the layout, labels, and controls on this tab before all properties it ultimately will reference are defined. The development effort you make in designing layout is not wasted, as the resulting section is a valid starting point for further evolution after the properties are created.

When you first drop a control dragged from the Basic Group, the control references a standard placeholder property, for example @baseclass.pyTemplateInputBox. You can save and preview the Section form (although these properties are not part of your application).

To produce a section with the appropriate layout, drag and drop the controls, adjust the labels, but do not complete the Cell Properties panel. Reopen the Section form and update each Cell Properties panel later, when the real properties are defined.

For an example of this approach, see Pega Community article Use pyTemplate properties and controls to rapidly prototype user forms.

Dragging a property from the Application Explorer

You can complete two cells of a layout in one step if the left cell is to contain a text label and the right cell is to contain a field corresponding to a property on the Application Explorer.

1. Locate and expand the work type that contains the property on the Application Explorer.
2. Expand the Data Model category and the Property rule type to list property names.
3. Select the Single Value property to be placed in the field. Drag and drop it onto the desired cell.
4. The system places the Short Description text of the property as a label in the left cell. It places the property as a (read-write) field in the right cell. You can adjust the settings for these cells.

Previewing the section

After you save this rule, click the Preview toolbar action to see a split-screen presentation of the section as it appears in read-write mode at runtime.

Removing inline styles from layouts

For ease of maintenance and re-usability, it is a best practice to create a custom style in a skin rule and apply it to the layout. See Skin form — Components tab — General — Custom styles.