Harness, Section, and Flow Action forms
Adding a Calendar control

Field

Description

Appears only when this field is in a section included within the current open rule. Click to open the section that immediately contains the field.

Select or type a property reference that identifies a single text value and has a Property Type of DateTime, Date, TimeOfDay or Text.

Alternatively, you can drag a property name from the lists of properties visible in the Application Explorer. Typically, this works for Single Value properties belonging to in the Applies to class of the current rule (or a higher class). If the container in which this field sits has a non-blank Using Page value, you can drag a Single Value property from within that embedded page property.

Click the pencil icon () to review the property (if the reference is to an existing property in the Applies To class of this rule or a parent of that class). If the property is not found, the New dialog box for the property form appears.

You can reference properties on any page identified on the Pages & Classes tab, using the normal notation pagename.propertyname for pages other than the page corresponding to the Applies To class of the rule.

If this field is in a cell of a section that includes parameter declarations on the Parameters tab, you can enter the notation param.NAME here, to use a parameter value for the field, where NAME identifies a string parameter. Make sure that the NAME parameter is declared on the Parameters tab, and that your application provides a non-blank value for the parameter value in all possible situations where the section appears. See Sections — Completing the Parameter tab.

For a harness, the property generally must be on the primary page of the rule — the page corresponding to the Applies To key part of the rule. However, a section within the harness may have a different Applies To class, and that section can include properties from its own class.

If this field is always displayed as read-only, you can enter a linked property reference here, of the form .AAAA.BBBB, where AAAA is the linked property and BBBB is any property reference in the object identified by the value of AAAA as a key. For example, if the property AAAA has a value corresponding to a key of a Data-Admin-Operator-ID instance, then .AAAA.pyUserName presents that Operator ID's full name. This allows values from that object to appear (read-only) in the run-time display, though your processing does not explicitly load the object onto the clipboard.

Accept the default pxDateTime control. When placed in a SmartLayout field, the adjoining Label cell is populated by the standard .pyTemplateCalendar property with a label value of Date Time. When placed in a repeating grid, the value appears above the control in the header cell.

Click the pencil icon () to review the control identified in this field.

Customizing the control

The control's default parameters are the ones you'll most likely use in your UI design. If you wish, you can customize the control within the context of the section that contains it. For example, you can:

• Display the control so that the user can pick dates and times from a calendar or from drop-down lists
• Enable the user to manually enter date and time values
• Select the date and time format
• Add behaviors and actions, such as on Change, Refresh Section, Set Value, Post Value, or Set Focus. You can specify multiple actions for a single control. The actions execute in sequence. See Control Form — Completing the Control tab for descriptions of the available parameters and how to define behaviors.

Your edits apply only to the control within the section that contains it and do not update the underlying rule. You an add multiple controls of the same type within a section, each with its own custom settings.

Do the following to customize an auto-generated control in a section:

1. Open the section or harness that contains the rule.
2. Select the cell containing the rule and open its Cell Properties panel.
3. In the panel, select the magnifying glass icon () next to the Control field. This displays the control Parameters dialog. See Control Form — Completing the Control tab for descriptions of the available parameters and how to define behaviors.
   
4. Modify as necessary.You cannot edit the Control Modes and UI Element settings.
   To immediately render your changes, click OK in the dialog. If satisfactory, save the section. The system generates the XML representing your edits and stores it in the section.

Displays only if dynamic behavior for this control was configured prior to V6.3. In V6.3 and above, click the magnifying glass icon () next to the Control field to configure dynamic behavior.

To modify an existing dynamic form action based on user updates or values for this field, click the magnifying glass icon () next to the Behavior field to open the Client Event Editor. Complete the Client Event Editor to select an event (OnBlur, OnChange, or OnClick) and the resulting form action.

Click the help icon ( ) on the Client Event Editor for assistance. For general information on this capability, see Harness, section, and flow action forms Help — Client Event Editor.

Client event support is not available for harnesses, sections, or flow actions that use directives.