Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

Drill down functionality using chart control



Drill down functionality on click of the chart is not working, when a chart control using report definition is used.
The same thing seems to work if user runs report from the Report definition.

Error Messages

Not Applicable.

Steps to Reproduce

1. Create a Report Definition(RD) with drill down and configure bar chart in it.
2. Explicitly run the report definition, one can see chart and it is possible to drill down to actual data that is, if hovered on bar graph , it is clickable.
3. Now use a chart control in section and configure it to use above created RD, drill down is not possible.

Root Cause

An issue in the custom application code or rules. Report definitions do not support drill down when displayed with a chart control.


Here’s the explanation for the reported behavior: Report definitions do not support drill down when displayed with a chart control.

An enhancement request, FDBK-15112, has been created for consideration by Pega Product Management. Another alternative is to creatre a custom control

Suggest Edit

Published May 4, 2016 - Updated October 8, 2020

Did you find this content helpful? Yes No

0% found this useful

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us