Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

Grid errors causes improper alignment



Field level errors causing improper grid row alignment with Pega 7.1.9.

Error Messages

Not Applicable

Steps to Reproduce

  1. Configure a grid with multiple columns.
  2. Add a validate rule to display errors at field level whenever validation is fired.
    If any cell has errors error text is displayed, as a result grid row alignment is going off as shown below:

Root Cause

A software use or operation error.

User is making grid fixed size and showing fields errors above the fields, the column moves down this is expected in fixed configuration.


Perform the following local-change:

User is suggested to display the error messages with triangle icon on the tool tip, this would not affect current design alignment and will display complete messages on hover.

For this below changes need to be done, as depicted in the screen shot:

Output screen:

Published July 10, 2017 - Updated October 8, 2020

Was this useful?

0% found this useful

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us