Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

Improper display of error messages in Pega Survey 7.1.2



Harness-level error messages are not getting displayed properly when more than one error is there. The bottom border overwrites the content as shown in below image:

Error Messages

No error messages. This is a look and feel issue.

Steps to Reproduce

1.Create Screen Flow.
2.Create Validate rule to validate fields.

Issue:Harness-level error messages are not displayed properly.

Root Cause

An issue in the custom application code or rules:

Developer had overwritten the css styles in their custom skin rule.
under containers>errors> outline  - height is specified as 35px.


Perform the following local-change: 

Remove the height attribute, as the error div height should be dynamic based on the error list and must not be hard coded to some value.



Published January 31, 2016 - Updated October 8, 2020

Was this useful?

0% found this useful

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us