Skip to main content
This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

SMA Rule Assembly Cache Management issue with "type of assembly"



"System is not configured for this type of assembly" message comes up in System Management Application (SMA).

Error Messages

System is not configured for this type of assembly

Steps to Reproduce

1. Open SMA for a Pega 7.1.7 environment.
2. From Advanced tab, choose "Rule Assembly Cache Management"

Root Cause

Assembly caching mode is set using prconfig or dynamic system setting "fua/assemblyCacheMode" , "prconfig/fua/assemblycachemode" respectively whose values can be "AC" ,"mixed","RA".

So the Rule Assembly Cache Management from SMA is used when the above setting is set to "RA".
The messge "system is not configured for this type of assembly" is seen in SMA  because the default value for the setting is "AC".


 Use "Application based assembly cache management" to clear the cache from memory to resolve the issue.


Suggest Edit

Published August 17, 2015 - Updated October 8, 2020

Did you find this content helpful? Yes No

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us