Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

Expand all option for repeat grid is not working with pagination

SA-50782

Summary



Repeat grids with expand all option turned on, fails to load contents when the grid also has pagination on.


Error Messages



Not Applicable


Steps to Reproduce



1. Create a section with repeating grid.
2. Turn on the Pagination.
3. In the Operation tab > Check Show Details and (Enter a flow action to get the details of the report) > Check Expand All.


Root Cause



In this scenario the flow action for the show details section included another grid, causing a nested grid scenario.

In this scenario, the reported issue is seen only in cases where both inner and outer grids are visible on load.

This is happening because of nullify all paging related parameters in grid generation at the end of the grid layout.

So one grid's generation is corrupting another grids parameters as the parameter names of the both grids are same.


Resolution



An enhancement request, FDBK-24475 , has been created for consideration by Pega Product Management.

Published February 5, 2018 - Updated October 8, 2020

Was this useful?

0% found this useful

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us