Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

Grid action set does not work when target item value is blank



On setting the Action set (such as, Refresh section) to a Grid row, the Action set does not work when the target item value is blank.

Error Messages

Not Applicable

Steps to Reproduce

  1. Create a grid in a section.
  2. Configure an action set in the grid column.

Root Cause

This behavior is as per Pega product design.


Here’s the explanation for the reported behavior:

In the read-only grid for a cell, when the value of the control is blank, there is no width for the control. Hence, the action configured on the cell is not triggered.

In the editable grid for a cell, when the value of the control is blank, a default width is present for the control. Hence, the action configured on the cell is triggered.

Published August 15, 2019 - Updated December 2, 2021

Was this useful?

0% found this useful

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us