Support Article
Not able to pass filter conditions from main to sub report
SA-28301
Summary
User is having a requirement of calculating the percentage value for two aggregate values. So tried with sub report.
But these two report definitions have same filter conditions. If a filter criteria on the main report is changed through report browser, the changed value is not passed to the sub report.
The sub report is still taking the default filter conditions mentioned in the rule.
User created the sub-report with desired filters. But the problem comes while trying to pass the filters of the main report to the sub report from the report browser.
The changed filter values are not passed to the sub report, it is still taking the default filter conditions mentioned in the rule.
Error Messages
Not applicable
Steps to Reproduce
1. Create main report and sub report with filter conditions as parameters passed from Main report to Sub Report.
2. Run the main report and change the filter conditions.
Root Cause
A software use or operation error.
Currently there is no such functionality available to pass parameter from main report to sub-report dynamically through report browser on filter changes.
This issue was determined to be a product enhancement request.
Resolution
An enhancement request, FDBK-16296, has been created for consideration by Pega Product Management.
Published September 29, 2016 - Updated October 8, 2020
Have a question? Get answers now.
Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.