Skip to main content

This content has been archived and is no longer being updated. Links may not function; however, this content may be relevant to outdated versions of the product.

Support Article

Requirement to hide custom error section on top of harness



Requirement to hide custom error section and form errors on top of harness. 

Error Messages

Not Applicable

Steps to Reproduce

  1. Configure a custom error section
  2. Add the custom error section to the perform harness
  3. Select In configurable section from the form level errors dropdown and point to the above section in the display options of the harness
  4. Configure form with validations

Root Cause

A defect or configuration issue in the operating environment. The custom error section with errors loads since it is available in the harness. 


Perform the following local-change:
  1. Remove the custom error section from the perform harness
  2. Change the display options to default
  3. Uncheck the Always show check box
  4. Configure the visibility condition or expression according to the logic if the custom error section must be available in the perform harness for other scenarios

Suggest Edit

Published January 2, 2020 - Updated December 2, 2021

Did you find this content helpful? Yes No

Have a question? Get answers now.

Visit the Collaboration Center to ask questions, engage in discussions, share ideas, and help others.

We'd prefer it if you saw us at our best.

Pega Community has detected you are using a browser which may prevent you from experiencing the site as intended. To improve your experience, please update your browser.

Close Deprecation Notice
Contact us